Does the ABS light being on make it where your brake pedal gets hard so you cant push down to apply the brakes

Does the ABS light being on make it where your brake pedal gets hard so you cant push down to apply the brakes 1 Answer

Replaced front driver caliper and front brakes. Engine light comes on and brake pedal goes to the floor. What would cause this? 4 Answers

1500 Silervado 08'. Push the brake pedal and will build pressure. Once you release. It goes back to the floor. Bled my brakes with power off.

RR tire wobbles going down the road, brakes vibrates when I apply the brakes 5 Answers

I have a 02 Silverado. While driving down the road..the RR tire wobbles pretty bad, and when I go to stop, the brakes have a thud feeling, vibrates when I hit the brakes, any ideas?

Yes my 2002 Chevy silverado the abs and the brake light is on I post a question my speedometer doesn't work you think it's my abs module is this the one under the drive side frame or the one under the master cylinder and what could be the connection that the abs has with speedometer tks for your ans 1 Answer

If you think the abs module could be I'll ck it my speedometer not working tks for your help is this the module under the driver side frame or the under the master cylinder

After sitting I go to turn my key wait for the fuel pump to push fuel into the throttle body. My truck has a tendency of being a hard start 2 Answers

My 2000 5.3 Silverado has an issue of being a hard start I replace the fuel pump but have not yet replaced the fuel filter I turn the key and it cranks over almost like it's not allowing the fuel t...