Why is the oil pressure alarm sounding when the sending unit and oil pressure sensor have both been changed? The oil pressure is fine and the truck runs great other than the constant dinging.

Why is the oil pressure alarm sounding when the sending unit and oil pressure sensor have both been changed? The oil pressure is fine and the truck runs great other than the constant dinging. 1 Answer

2012 GMC Seirra 1500 5.3, oil pressure low and says to turn truck off. Codes hits for bad oil pressure sensor/sending unit. I replaced the sending unit AND the screen as well. still hits code 5 Answers

My truck has low oil pressure and dash says low oil pressure and to shut off engine. Scan truck and code hits for bad oil pressure sensor/ sending unit. I replaced the sending unit AND THE SCREEN. D...

my oil pressure is 55 down by the oil filter and almost 0 at the sending unit. 7 Answers

my truck was struck by lightning on labor day and has since been at the dealership getting repaired. it is a 2008 Chevrolet 1500 LTZ with the 5.3 in it.all electrical components have since been repa...

Why does the oil pressure keep dropping 2 Answers

Oil pressure gauge indicating no oil pressure. Had it in the shop and they said I need a new engine. However they took off the oil pan and said it needed cleaned and then put back together. Ran ...

Low Oil pressure light on and taping in the engine 3 Answers

I was driving my 2005 Chevy Silverado then stop at the red light i was idling then low oil light came on and the engine was taping then when i accelerate the oil low pressure goes off but at idli...