I have a 2006 Chev Silverado. When driving the guages stopped working as well as radio, air conditioner compressor and fan. The ABS and Battery light stayed on. I have checked all the fuses as well as the ground wires. any suggestions

I have a 2006 Chev Silverado. When driving the guages stopped working as well as radio, air conditioner compressor and fan. The ABS and Battery light stayed on. I have checked all the fuses as well as the ground wires. any suggestions 1 Answer

I have a 2008 Chevy Silverado 5.3. Truck idles good when in park but when I put it into gear the check engine light comes on. P0307, witch is Cylinder 7 misfiring. Ive changed all the lifters,coils,injectors and solnoids. Plugs and wires as well. Even turned off the AFM to see if that would help. cleaned the pushrods, made sure they worked. valley cover has been cleaned as well 2 Answers

I have a 2008 Chevy Silverado 5.3. Truck idles good when in park but when I put it into gear the check engine light comes on. P0307, witch is Cylinder 7 misfiring. Ive changed all the lifters,coils,in...

I have a 2005 Chevy silverado on my way home from work my battery started draining and did so until drained. All gauges n lights quit as well as truck. what's my issue 7 Answers

It jump started but then drained again in 9 miles took 3 jumps to go last 3miles home. Alternator n battery r about a year old. How can it drain as I drive? And what do I do to fix it?

i replaced my throttle positioning sensor. i may have to change the pressure sensor on my fuel tank. my service engine light is on and my truck stalls as if it is not getting any fuel.how do i bypass 4 Answers

tps replaced..if i start my truck and the service engine light is on my truck will stall out. if the service light is off the truck is fine. i know it is a sensor but how can i bypass it...if i keep ...

I have a 2005 1500 silverado and the radiator fans are staying on after the truck is off and drained my battery dead. Replaced the relay but no luck there. Any suggestions? 18 Answers

In addition SES indicated knock sensor code. Had the knock sensors, cleared codes, and SES has not turn back on, but the cooling fan is still draining the battery. I read some post about Powertra...