Front motor blower stopped working then replace it worked then stopped back blows fine what could be problem get power to panel lights defrost button don't work either on panel
Asked by 5giftsofgod Nov 28, 2014 at 10:11 PM about the 2003 Ford Expedition XLT
Question type: Maintenance & Repair
I changed my blower motor it worked then
stopped back one blows.i thought it was
the front blower I changed it it stopped
working after while.my light on panel still
light and rear defrost button don't work
what could be problem thx
4 Answers
Have you checked all the fuses? Not just the fuse itself, but look for any corrision or loose fitting fuse. Are you getting any voltage to the fan motor? is it zero or some but not 12v?
2007 Ford Expedition front blower not working. Is there a fuse to replace? If so where is it. I've replaced the resister but it still is not working. Should I buy a blower motor?
Similar problem. One low cost idea.......Locate the "ballest resistor" or module and with the system on, wiggle the cable. If it comes on intermittently, 9 times out of 10, it is the connector. Ours didn't work until my wife accidentally kicked the harness with her foot. I spliced a new on. The old one had a melted terminal.
If you have a melted terminal there is a reason why.
