Misfire cylinders 1&4 changed coils and plugs which turned out to be fine garage said it is something in the computer that the dealer needs to look at

Misfire cylinders 1&4 changed coils and plugs which turned out to be fine garage said it is something in the computer that the dealer needs to look at 1 Answer

I brought my 2007 Honda civic to the dealer because cylinders 1 and 4 were misfiring. After days at the dealer they tried everything possible and continued to state that my parts were all working and that they had never seen anything like this. Well, after 3 days and a call to Honda America turns out that that the last time I had gotten gas the gas was mixed with enough water to cause the issue. I now have a case open with the 7-11 mobile, a claim number, Adjuster and I have also contacted an Attorney as I have had to rent a car and due to all of the labor.hours put into my car the cost is about $1500. Mind you they did not have to replace ANY of my old parts as they were all working just fine. I am so mad/sad. Has anyone ever heard of this? 6 Answers

See above. By the way, per the MM at Honda who spoke with Honda America he said that apparently Honda's made after a certain year (sorry I forgot which year he said) were made so that if anything fore...

All cylinders misfiring and random misfire 1 Answer

I have a 2001 Honda Civic EX and all the cylinders are misfiring. It also says a random misfire. The car will also start shaking a little and then the check engine light starts blinking. We have t...

Car sounds like I have a flat tire when driving, but all tires are fine and filled properly. The tires are wearing unevenly as well. They've replaced the engine mount (said it was vibrating too much) and nothing changed. Aligned it and nothing changed. Now they want to replace the compliance bushings, replace all the tires, and align them again. Would love to know what these symptoms can be attributed to (and if they've just been ripping me off!) 1 Answer

I checked online what the other signs of worn compliance bushings were (like a clunk when braking), but I've never had a clunk when braking.

One mechanic says that piston 3 needs to be replace, another mechanic says that it's off a thread wen installed..which one? 2 Answers

First mechanic says that piston 3 went out and needs to be replaced..a second opinion said it may be the spark plug is off thread wen it was installed, and that's the reason for the engine sound...