how many miles before all sensors reset?
Asked by Papasal1 Apr 29, 2015 at 03:17 PM about the 2004 Chrysler PT Cruiser GT Wagon FWD
Question type: Maintenance & Repair
Just replaced my timing belt. Mechanic said that it had jumped two teeth! Engine had
come on many times before and made the car run awful! Now new belt and O2 sensor,
water pump. It seems fine, but all my sensors haven't set yet. How many miles do you
have to go before this happens
11 Answers
25-50..all are different..even the same make and year one will set quicker than the other.. i drive them 25 miles,park it, let it completely cool down and do the same thing
papassal1, thanks.also not related to you...,say if you have a dead or replace your battery the check engine light may be off when restarted..but it will still need to be driven for it to reset/learn.hi TS..say lets market a backup battery.
i know that...if you know your going to diconect or have a dead battery then great.. i know a little bit about everything..but am only a master at 4 things...dont ask..
Light back on after 50 miles ish. Car stalls. Fuel pump works fine, codes say it's the o2 heater hi, ( just replaced ). Multiple misfires, IAC lo, then won't start or worse just stalls. Insane, spent too much money already. Funny thing is that it ran flawlessly for the last two days? ?
5 months 5 shops, 2 sets of new 02 sensors, PCM rebuilt, STILL get the engine light on after 32 miles that has 2 codes : P 0032 and P 0038 which in my book means High heater curcit bank 1 sensor 1 , and High heater curcit bank 1 sensor 2. SOOOOO, I must have a bare or broken wire in the circuit. Anybody have a diagram of this?
Check voltage and grounds. Dealership said that it may be or is the catalytic converter. He was wrong. A small fender bender in the front end pinched the wiring. I regrounded them and presto check engine light went off. I've driven approx 25 miles and still clear. Good luck! p.s. my OBD II showed same codes and data. Also, shopkey.pro will give you electrical diagrams.
Have a 2001 pt crusier replace camshaft and pcm engine light still on everything else is also been to the dealership after I replaced a brand new pcm what could be the problem it drives great has the speed just the engine light on and my rpm not shifting like it’s suppose to
