car fails to start after staling
Asked by GuruXHSVS Oct 29, 2018 at 02:45 PM about the 2005 Chrysler PT Cruiser Touring Wagon FWD
Question type: Maintenance & Repair
after staling my 2.2 CRD my pt cruiser will not start, turns over ok but will not fire up.
No power at the injectors any ideas Have been working on this for months, by the way no fault codes stored.
3 Answers
My US database only shows 2.4L engine. The voltage wire for your fuel injectors is it dark green wire with orange tracer? The asd relay, where applicable, supplies voltage to several major systems, the fuel injectors and ignition coil, just to name a couple. The computer has to see cam and crank sensor signals with engine cranking or it won't ground the asd relay. Now, is that your problem, I don't know?
The tacho jumps when cranking the engine, have replaced the cam sensor should I replace the crank sensor?
It depends, does the fuel injectors and ignition coil have primary voltage, engine cranking? I gave you the wire color. If no voltage, have to check asd relay circuits, voltage and ground.
