I have a 97 GMC 1500 keeps going through starters change flywheel wiring harness crank position sensor wondering why

I have a 97 GMC 1500 keeps going through starters change flywheel wiring harness crank position sensor wondering why 1 Answer

Keep putting new starters on starts good at first then starts grinding again after a few cranks replace flywheel everything don't understand

I have a 97 GMC 1500 keeps going through starters change flywheel wiring harness crank position sensor wondering why 4 Answers

I have a 2005 GMC Sierra 1500 Z71 pickup that has an oil pressure alarm that keeps going off whenever I stop the vehicle? 1 Answer

The idle is low around 5k rpm and the oil pressure alarm keeps going off when I am stopped but is fine when moving?

OK so I have a 1993 GMC sierra sle with a 4.3 liter. My flywheel keeps making noises. 3 Answers

I was adjusting my timing when it happened. I took my tranny off and adjusted her and put everything back and now I have no power and I'm misfiring. But flywheel still makes noise.

I am have a problem very much like the rest of you 1993 GMC truck owners I was wondering if anyone has changed the crankshaft position sensor 2 Answers

My truck had a little miss I figured it needed a plug change or other minor servicing , then we went out of town with it and had to keep one foot on the gas and one on the brake to get her home at w...