just replaced air compresser but it want kick on

just replaced air compresser but it want kick on 1 Answer

Just replaced fuel pump on my 1998 GMC chevy cierra z71 4wheel drive truck.. I seemed fine and I drove I a couple days then it quit running. It's getting gas in pump but not presure. What can I do? 1 Answer

Also replaced relay fuse. Help

Rough idle and misfiring at lower rpms. If I stomp on it it seems to run smoother. Replaced fule filter, cap and rotor, pcv valve, crank and cam position sensors, mass air flow sensor,. 1 Answer

After all parts were replaced I disconnected both battery cables and touched them together per a mechanics suggestion to "clear the computer ". Would a dirty egr cause this? Please help.

I replaced the blower motor in my 1996 GMC Sierra but it still doesn't work at all. 6 Answers

Air wasn't blowing in my truck at all, so I replaced the blower motor, but it still isn't blowing at all. I haven't bought a resistor for it cause I don't think that's the problem, what else could i...

1988 GMC Sierra air conditioner has no power at dashboard display, no blower, no heater. Checked the fuse dasand it is okay. Found a relay on firewall, but how can I tell if this is problem? 1 Answer

Checked the dashboard fuse and it is okay. Found a relay on firewall, but how can I tell if this is problem?