I have a 1995 Jeep Grand CherokeeLaredo that doesn't want to go when you put it in gear. What's wrong?
We had the transmission rebuilt last year. Could it still be the transmission?
ksteinmetz answered 10 years ago
if there is no signs of grinding or trying to move then I would check to see if the linkage going to trans. is actually working. it maybe one of a few things that might keep linkage from working. but I think it is a good place to start as any if does try to move but will not then you may have bigger issues.@ transmission issues
We had the transmission rebuilt last year. Could it still be the transmission?
1995 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
Can I put a 1994 jeep grand Cherokee rearend in a 1995 jeep grand Cherokee?
1995 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
But it drove like it if I was pushing on the breaks. Any idea what could I do before I change the transition??
1997 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
i have a 1995 jeep laredo that when idleing in park or nutral, doesn't shake or rattle but when you put it in drive and have your foot on the break sitting still its like ir drains the engine and the...
1995 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
I have a 2004 Jeep Grand Cherokee Limited 4WD V8. Was sitting at an intersection and the oil pressure just went to zero and my "check gages" light when on so I pulled it into a parking lot and shut it...
2004 Jeep Grand Cherokee Limited 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.