Austins1999Camaro answered 6 years ago
Most likely sensor could have knocked loose on wheel bearing assembly
It is very possible that sensor became loose due to the impact. If you hit the bump with enough force to slightly bend the rim, the sensor will make the light come on too. I have seen it happen.
Hit a speed bump now ABs light on is it just the sensor? You reckon
2005 Jeep Grand Cherokee Limited 4WD
-
Maintenance & Repair
air bag light comes on at startup, for 7 seconds. goes out for 2 seconds, comes back on and stays on. 1 checked fuses in under dash panel..OK 2 checked and replugged the connections under the driver ...
2003 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
Had to replace a brake line. We bleed the brake but now the abs light is on.
2001 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
My ABS light came on the other day. I read up on it and it said a variety of different things all pertaining to the breaking system of my jeep. I plugged a code sensor tool into the bottom of the da...
1998 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
I took my Jeep Grand Cherokee Overland 2012 for recall and after the recall Service 4WD light became on. I took it to the mechanic and tried to find out what’s the problem but he couldn’t get anyt...
2012 Jeep Grand Cherokee Overland 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.