Ecm fuel pump fuse keeps blowing,switch not on when it blows
Asked by Richardr4445 Oct 29, 2015 at 07:30 PM about the 1994 Oldsmobile Cutlass Supreme 2 Dr S Coupe
Question type: Maintenance & Repair
How do I go about tracking down the
problem.it has to be the wiring because I
put new fuel pump in.
6 Answers
If this is just happening since you put in the new fuel pump, it has to be in the area of the plugin for the fuel pump.(short) Re-check the plugin to the fuel pump,
Richardr4445 answered 9 years ago
No I thought was fuel pump,its bad ground or something,how do I track it.
You have to just look for grounds, and follow wires until you find something bad. If you had a test light, at the grounds when the circuit is live test by jumpering between the ground connection and to where it was attached, the light should come on.
This is just a shot in the dark, but check the signal light flasher under the dash. Mine was a plastic flasher tightly gripped in a springy metal holder. The plastic got brittle on mine and the holder crushed it. It sort of still worked, but sort of didn't and it caused intermittent power drains that caused all sorts of weird electrical problems with my car. Once I changed the flasher all my electrical problems went away and life was good again.
How many amps is the fuel pump fuse for a 98 Oldsmobile Cutlass
If you still have the owner's manual for your car the information will be in there. If not I'll check what it says for my '94, they're quite likely the same. A lot of that information is likely stamped on the inside of the fuse box lid as well.
