blinker not working
4 Answers
It could be a bad wire or a bad socket that the bulb goes into. You can get new bulbs that are no good also, did you make sure they worked. If one side lights up then it's not the fuse. If fuse was bad it would not light up cause there would be no power to light it up. If the front lights up then and the back doesn't work on the back, wiggle the bulb in the socket, move the wires around, try another bulb.
actualy the problem is a bad turn signal relay/flasher ....
I dont have an answer but I do have a question I have a 1996 Oldsmobile cutlass supreme and the right blinker only blinks sometimes and left side just lights up in the car but doesnt blink at all.. and will not see it on the outside unless you move the stick up nd down.. does anyone know what the problem is and what part i need..
Jamesburke01 answered 4 years ago
I have an 86 cutlass supreme. It has 1 flasher thing on the fuse box. Hazards work but the directionals wont. And the fuse is good. Directionals don't even turn on