Where is cam shaft position sensor on a 2000 pontiac grand am, 3.4l. V6 engine

Where is cam shaft position sensor on a 2000 pontiac grand am, 3.4l. V6 engine 1 Answer

I have a 99 pontiac grand am se 3.4L V6. The issue is that it starts and idles fine but as soon as I go to accelerate it just shuts off. It did have overheating issues but right after I fixed those it started doing this. I replaced the cam position sensor and also the engine coolant temp sensor and it didnt help. I was thinking of replacing the ignition coil packs and housi g but not sure if that would fix it. There are no check engine lights or stored codes . 4 Answers

I have a 99 pontiac grand am se 3.4L V6. The issue is that it starts and idles fine but as soon as I go to accelerate it just shuts off. It did have overheating issues but right after I fixed those...

Where is the photo sensor located on a 2001 Pontiac Grand AM GT V6? 4 Answers

I posted the question about cluster lights not lighting up in the daytime. Mechanic and GM said that was never a function. The GM people told the dealer's mechanic to cover the photo sensor and I want...

How to replace the Crankshaft Position Sensor A for 2000 Grand AM SE1 5 Answers

Where is the Crankshaft Position Sensor "A" located for a 2000 Grand AM SE1 4 Cylinder car? Any help is appreciated. Thank you, Mike

2000 Pontiac Grand am v6 1 Answer

Car sensor came on and same time AC stopped working. The sensor was for the evaporated system so I changed the maf sensor..car was working fine besides AC... still blowing hot..thanks couple hours ...