2000 grand am se
4 Answers
Check the ignition module: The electronic Ignition Control Module (ICM) monitors the CKP sensor signals and based on these signals, sends a 7X reference signal to the PCM so that correct spark timing and fuel injector control can be maintained during all crank and run conditions. Since the PCM controls spark timing and ignition control during crank and run, there is no bypass mode. The ICM is not repairable. When a module is diagnosed to be faulty, it is replaced as a separate component Did you check your your coil packs for power? did you have the battery cable off when you did the repair.
I had power with the old pump and i did not unhook the battery while repairing it
