I have a 04 Pontiac grand am. My car is jerking and eaten gas. My check engine light is not on. I have put wires and spark plugs .what wrong. I was told it was a Cadillac converter. Help

I have a 04 Pontiac grand am. My car is jerking and eaten gas. My check engine light is not on. I have put wires and spark plugs .what wrong. I was told it was a Cadillac converter. Help 1 Answer

I have a 99 pontiac grand am se 3.4L V6. The issue is that it starts and idles fine but as soon as I go to accelerate it just shuts off. It did have overheating issues but right after I fixed those it started doing this. I replaced the cam position sensor and also the engine coolant temp sensor and it didnt help. I was thinking of replacing the ignition coil packs and housi g but not sure if that would fix it. There are no check engine lights or stored codes . 4 Answers

I have a 99 pontiac grand am se 3.4L V6. The issue is that it starts and idles fine but as soon as I go to accelerate it just shuts off. It did have overheating issues but right after I fixed those...

I have a 2002 grand am gt, I have changed water pump, thermostat, flushed the heater core and radiator and I still have no heat and it overheated on me tonight. I can't figure out what is wrong, help? 8 Answers

Changed the thermostat twice, replaced the water pump, flushed the radiator and heater core. The car goes through coolant like no other. It now blows either hot or ice cold air no inbtwn. I can not fi...

I have a 1995 Pontiac Grand Am the Fan under the hood was working and after me and my cousin put a new Radiator in and then the fan stopped working ever since. i dont know what happened. 1 Answer

I looked online,google,youtube And no answer. Says there Aint aint No fuses under the hood if there is i cant find them. I know it aint the fan cause we hooked it up to the battery and it works so...

I have a 2001 pontiac grand am gt.The bolt that holds the tensioner pulley in the engine block keeps coming out and my belt slips off! Is it possible that it has the wrong size bolt or something else? 6 Answers

The bolt that holds the tensioner pulley into the engine block keeps coming out and my belt and pulley fall off! Is it possible that the bolt is the wrong size or maybe the threads inside the block ...