Getting a code P0442 and P0442 pd after my car stalled out going down the road and had to tow it home.
Not sure if it matters, but we just put new exhaust on and replaced both CV shafts. After we got it all fixed it ran fine, I filled up car (first time totally filling it since I bought it, was only sticking $20 premium in at a time before this) and after I replaced the gas pump and put the gas cap on and went to get in the car I noticed gas coming out from under the car (looked under car and could see it coming out of the end of a line, it stopped after approx. 1/4 gal dripped out. Was told it might just be some type of over flow? But I stopped pumping when it clicked up indicating it was full!) I drove it all that day w/o a problem, then it sat for like 3 days and the next time I drove it, it only made it 1 mile down the road before it started acting up. It stalled out and would fire up and stall out again and finally wouldn't restart at all, so finally towed it home. 3-4 days later went out and tried to start it and it fired right up and stayed running. But I'd like to find out how I can fix this before I dare drive it and get stranded again!