You have to remove the wheel, all of the brake hardware(rotor, caliper and caliper mount), most likely the wheel bearing assembly and the lower part of the strut. If you've never done one before make sure you have the car on jack stands and have all the tools you will need ahead of time. Air tools are not a must but make the job a lot easier.
how to replace front axle?
1999 Pontiac Grand Prix 4 Dr SE Sedan
-
Maintenance & Repair
how do I fix the driver side window so it goes up and down
2002 Pontiac Grand Prix GT
-
Maintenance & Repair
How to disable theft system on 05 Pontiac grand prix
2005 Pontiac Grand Prix Base
-
Maintenance & Repair
need to change pcv valve on 2002 pontiac grand prix 3.1
2002 Pontiac Grand Prix GT
-
Maintenance & Repair
Hi all, we were having some issues on idle with our 1999 Pontiac Grand Prix (3.8L engine, not supercharged) and discovered it's either the engine coolant temp sensor or the connector. We thought it wa...
1999 Pontiac Grand Prix 4 Dr SE Sedan
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.