Asked by cobra1128 Oct 02, 2012 at 08:47 AM about the 1996 Chevrolet Corvette Coupe RWD
Question type: Maintenance & Repair
On the driver side of my targa top the glass/acrylic has come loose from the frame it mounts to. Does anyone know what I can use to re-adhere this acrylic part to the framing.
On the driver side of my targa top the glass/acrylic has come loose from the frame it mounts to. Does anyone know what I can use to re-adhere this acrylic part to the framing.
1996 Chevrolet Corvette Coupe RWD
-
Maintenance & Repair
I just bought my first corvette today really freakin excited its a 1985 black on black was wandering how to take off the top any help would be greatly appreciated. thanks jeff
Chevrolet Corvette
-
General
The top will not go back up after batterie went dead
2007 Chevrolet Corvette Convertible RWD
-
Maintenance & Repair
These are made to fit the targa top screw positions and screw in the same place as the targa top. They sort of look like the old "T's" from the T-top vettes when screwed into position. They give the...
1994 Chevrolet Corvette Coupe RWD
-
Car Customization
WE have just bought our 1994 convertible and can't seem to get the top lowered, we don't have an orginal owners manual which we are trying to locate, need instructions on lowering the top, we releas...
1994 Chevrolet Corvette Convertible RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.