the "d" light in the cluster does not light up when i shift into drive

the "d" light in the cluster does not light up when i shift into drive 3 Answers

i HAVE A 2004 SUBARU LEGACY OUTBACK THAT GETS A PO301 CODE WHEN THE ENGINE LIGHT STAYS ON AND THE CRUISE CONTROL LIGHT BLINKS. THE CRUISE CONTROL DOES NOT WORK WHEN THIS SITUATION IS NOT RESET. 2 Answers

DOES THE CRUISE CONTROL LIGHT TELL ME MORE ABOUT MY PO301 CODE PROBLEM?

2007 Legacy 2.5i Limited 5spd. MT will not shift into gear when car is running, whats the issue? 1 Answer

I just replaced the throw out bearing on my '07 Legacy 2.5i Limited. Now that everything is back together and on the ground, I cannot get the car to shift into gear once I start it. I can cycle thro...

Why does the airbag light stay on 2 Answers

Turn the ignition and on comes the airbag light

I turned my 97 Subaru legacy 2.5gt off. When I tried to restart it everything was dead!!! It was like the battery wasn't hooked up. I took the keys out and walked in the house. I looked outside and the tail light were on and the front amber lights were on. I tried to start it and nothing. I cleaned the battery posts but it didn't help. I unhooked the positive cable and put the key in the ignition and turned it on in order to hook the positive cable up. It started just fine, however the running lights are still on and the dash lights are blinking! I turned the engine off and the running lights were still on and the dash lights were still blinking. I had to unhook the positive cable to stop this process. Can anybody out there point me in the right direction??? 1 Answer

I turned my 97 Subaru legacy 2.5gt off. When I tried to restart it everything was dead!!! It was like the battery wasn't hooked up. I took the keys out and walked in the house. I looked outside and th...