Your Answer:
Related Questions
-
The engine was making a noise so I when and got anthore engine the head is different but I noticed that too late but they both ej25 can I just change the heads 1 Answer
2005 Subaru Outback 2.5 i Wagon
-
Maintenance & Repair
-
My 2005 Outback..just started to shudder when I started from a stop sign. Once I got going that stopped, but engine light came on. Will it be ok to drive 5 miles to the mechanic? 1 Answer
My 2005 Subaru Outback just started shuddering when I started from a full stop, and engine light came on. Seemed like a struggle to move. Once I got going was a little better, but every time I had t...
2005 Subaru Outback 2.5 i Wagon
-
Maintenance & Repair
-
Hello - I have a question for all the Subaru experts if you could please. I was planning to buy a 2011 Outback tonight, 95K miles. What I found out today is making me question the investment. After reading about the CVT issues, I started digging and confirmed that this Outback did have an issue just a few months ago and SOA confirmed the CVT in this vehicle has a 24K or 24 month warranty since it was replaced with a remanufactered (NOT REBUILD) CVT under warranty. So, should I buy it and have peace of mind that the CVT issues have been addressed and maybe I'll get 100k miles out of it or walk away? Can't afford a new one, so was looking for exactly this price range - I think I should happy at this news since the known CVT problems have been addressed but could I be getting into a money pit. Thanks for any helpful feedback! 1 Answer
Hello - I have a question for all the Subaru experts if you could please. I was planning to buy a 2011 Outback tonight, 95K miles. What I found out today is making me question the investment. After ...
2011 Subaru Outback 2.5i Limited
-
Maintenance & Repair
-
I've got a 2006 Subaru Outback that just had the engine replaces. Occasionally when I step on the gas coming out of a turn, like entering a highway, it misfires a little and the check engine like blinks a few times then goes out. The code says misfire in #3 cylinder. What would cause this? 13 Answers
Misfire when stepping on the gas coming out of a turn.
2006 Subaru Outback 2.5i Limited Wagon AWD
-
Maintenance & Repair
-
i have a 2004 outback 3.0 that started overheating 3 days after i purchased it. I had the obveous replaced; heat sensor. radiater cap. When I went to rewplace the thermostate I found that it had been removed. Put in an after market therm and it didn;t change situation. I replaced water pump. That didn't work. Situation now is that the two upper hoses get hot quickly and are under pressure; lower hose is much cooler and not pressureized.Logic dictates either a bad therm (but it overheated even when the therm was removed) or a bad radiator (but the radiator seemed to pass water freely when I had it out. I understand there is a chemical that detects carbon in cooling system. Seems that should be my next step to rule out hg. I also understand that heater plays a roll in cooling system but not sure how much it would effect water temp and pressure. Any suggestions would be appreciated 2 Answers
started overheating. I replaced heat sensor, radiator cap. Went to replace therm. but found it didn't have one. Did relace it with a non subaru therm. Didn't solve problem so replaced water pump. A...
2004 Subaru Outback H6-3.0 L.L. Bean Edition Wagon
-
Maintenance & Repair
Shortcuts
Search Subaru Outback Questions
CarGurus Experts
-
#1Mark WeinerReputation33,510
-
#2TheSubaruGuruBostonReputation28,670
-
#3Keith CahalanReputation3,390
Find great deals from top-rated dealers
SearchRelated Models For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.