Try moving the bulb around in the bulb socket with the tail lights on, may not be making contact.
Did you get an answer to the bulb problem? I’m having same issue
combined bulb for brake tail light - i have 4 volts only for tail light, brake lite has 12 volts
check connection under right side bumper, wire can break so no 12v feed to left side
my tail light on the driver side of my 06 impala wont work. the bulb and fuse are still good. what could the problem be and how do i fix it
2006 Chevrolet Impala 3.5L LT FWD
-
Maintenance & Repair
My driver side tail light won't work. I have a 2011 Chevy Impala ltz. The turn signal, brake light , and parking light all run on the same bulb, and they all work when I use them. The fuze is good,...
2011 Chevrolet Impala LTZ FWD
-
Maintenance & Repair
How do I replace the tail light bulb? I looked in the trunk and there is nowhere for me to pull the bulbs out, I think they are literally in the bumper of my impala convertible
1972 Chevrolet Impala
-
Maintenance & Repair
My tail light only comes on when I brake and signal why won't it come on regularly ... What is the problem??
2007 Chevrolet Impala 3.5L LT FWD
-
General
My cars left turning signal works as it should. My right turning signal works as it should unless I apply the brakes, then it stays solid, not flashing. When I release the brake it resumes working...
2000 Chevrolet Impala FWD
-
Maintenance & Repair
CarGurus has 115 nationwide Impala listings starting at $3,531.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.