My son's 2000 Toyota Camry needed to be jumped today(has a new Battery). It started and after several miles he said it started to lose power. Could it be the throttle position sensor, air filter?

My son's 2000 Toyota Camry needed to be jumped today(has a new Battery). It started and after several miles he said it started to lose power. Could it be the throttle position sensor, air filter? 3 Answers

I went to the mechanic who changed the ERG valve in and reset the code. He said its a generic code and he couldn't do anything else. I went to the toyota dealer who said they would have to change the vavle again since that's the code!!! the smog shop couldn't help they don't give detailed info on 2000 and above vehicles. So I need to pass smog and no one can help. it could be anything with the PO 401 code. I need to find out what it is and fix it. it's a 2000 Toyota Camry 4 cylinder. 7 Answers

How hard is it to change the VSV valve? what else could I check and replace it has 200,000 miles.

I accidentally reverse boosted my 2010 Toyota Camry Sport. The car will move in reverse and all electrical systems seem to be fine, but it will not accelerate or move forward. Any suggestions? Could it be a fuse? 2 Answers

I thought I knew what I was doing when I tried to boost my dead battery on my 2010 Toyota Camry Sport. The car started and I took the cable off. However it will now only drive in reverse. All electr...

My husband put in a new starter and the car still won't start when he turns the key it makes a click sound he just replaced the battery too what could it be 1 Answer

He put a new starter in and replaced the battery and it still won't turn over it makes a click sound he has tried checking the wires and the ground wire

2002 Toyota Camry V6 3.0 Started burning 2 qts oil 4 wks ago could it be the pcv 2 Answers

Using 2 qts oil a day started 4 wks ago