I have a 2000 7.3 f250 2wd cranks but no start
Asked by Guru3762N Jul 18, 2020 at 08:01 PM about the 1999 Ford F-250 4 Dr Work Extended Cab SB
Question type: Maintenance & Repair
Stopped at a store went inside and came back out and it
wouldnt start it has a new hpop , ipr, idm computer, fuel
bowl heater, glow plugs, valve cover harness both sides,
cps, and glow plug relay and icp still no luck it doesnt
smoke when trying to start it turns over fast doesnt even
attempt to start and yes the wts light comes on a and
tachometer moves please help
9 Answers
SavedbytheBloodofJES... answered 4 years ago
You need to scan it. Those things are known for crankshaft sensor to fail randomly. Usually it wont even throw a code. Sensor is cheap and easy to do. Without a scan tool, you are just guessing. Check the fuel filter and make sure its filling up with fuel.
It's not getting fuel even though all fuel components are new and crankshaft sensor is new
Everything is new? Both fuel pumps and the fuel filter? Is the transfer pump working?
Scan for codes and see if the injectors are getting a signal.
SavedbytheBloodofJES... answered 4 years ago
Check for power at the pump. Check the fuse. Check the relay. Wiggle the harness. Check the ignition switch. Something has to be wrong.
I have checked all og that and still no luck I've never had a truck give me thos issue I'm stumped