Ford f 150 2003. Replaced power window motor, drivers side, works but catches, clicks , & needs hand pressure to help rise . Any advice?
Asked by Carolfrank Jan 07, 2013 at 12:54 PM about the 2003 Ford F-150 Lariat Crew Cab 4WD SB
Question type: Maintenance & Repair
2 Answers
Are the roller binding in the track? and are the lubicated good all so check the trakes on th sides of the window could be binding there all so
On most vehicles, to remove the window motor, normally one has to drill out three or ro rivits. When reinstalling the motor screws must be used. Most oftentimes the problem is the screws used are to long. When the window is raised or lowered the mechanism in the door hits the screw. But the secrew in from the back side (head inside) and it should solve the problem. There is also a possitility you have a bad motor.