I have a 96' blazer motor from a 4x4 going into 01' 2 wheel drive blazer. Can someone tell me the solution to the oil pan not being interchangeable?

I have a 96' blazer motor from a 4x4 going into 01' 2 wheel drive blazer. Can someone tell me the solution to the oil pan not being interchangeable? 1 Answer

I have a 97 chevy blazer that has 4.3 liter 4wd with a bad tranny can i take the motor and put it into a 01 chevy blazer thats a 2wd 2 Answers

I have a 97 chevy blazer that has 4.3 liter 4wd with a bad tranny can i take the motor and put it into a 01 chevy blazer thats a 2wd

I have a 1994 Chevy blazer i was told the motor was changed now i dont know if its a 350 or 305 if it helps the bolt go down through the middle of the valve covers can u give me the codes for both 2 Answers

I can't order parts until I know what I have can u help me i was told theres a code in the back of the motor but i was told it was on the pass side and someone else said driver side and then i wa...

This is important, to me. Just purchased a 98 4.3 Vortec s-10/blazer engine, in car. What I want to learn is can this engine be made to run like the old scholl small block chevys? 1 Answer

Hello all you smart guys, I intend to install this engine in a 70 year old car, and would prefer leaving all the computer junk in the dumpster. I think, first I need a distributor that can give me...

how can i wire a 12 volt , 9 amp light bar directly to my blazer 1 Answer

I am a volunteer firefighter and would like to put a light bar on my blazer, the light bar is a 12 volt bar that has a peak draw of 9 amps and an average draw of 3.6. where can i get the power i need?