I press the clutch petal and I hear a squealing noise, sound like a belt, clutch still engages and shifts, what do I need to do?

I press the clutch petal and I hear a squealing noise, sound like a belt, clutch still engages and shifts, what do I need to do? 2 Answers

92 s10 clutch problems what do I do? 2 Answers

I’ve replaced a clutch in my 92 S-10 I’ve replaced both the master and the slave cylinders and the throw out I’ve bench bled the system and bled it through the bleeder screw I have pressure, but m...

Was rolling in 5th gear going 60, heard aloud screeching noise and it threw us forward in the seat and slowed it immediately to about 40.I pulled off to the side of the road and smoke was coming from under the truck.I looked around and couldn't see anything visibly wrong.I started it up again just fine and started rolling in 1st gear, then I tried to shift to 2nd the truck just stopped and wouldn't go into any gear.At this point the truck will start but when I let the clutch out, it dies(in neutral). Had to remove my drive shaft to be towed on towrope because it wouldn't roll smooth in neutral. When the engine is running now I don't feel any vibration through the gearshift anymore like how I used to before it broke down. What could it be? 3 Answers

Was rolling in 5th gear going 60, heard aloud screeching noise and it threw us forward in the seat and slowed it immediately to about 40.I pulled off to the side of the road and smoke was coming from...

I have a 98 s10 2.2l with a nv1500 there is a load squealing coming from the trans when I shift into first and attempt too take off I've replaced the trans the slave the master the clutch the pilot 2 Answers

Please help I can't figure it out I've changed everything associated with the trans and it's still there

I have a 1991 Manual 5 speed chevy s10 v6 2.8 L, and I need to know what type or weight of manual transmission fluid is acceptable? 7 Answers

I have a 1991 Manual 5 speed chevy s10 v6 2.8 L, and I need to know what type or weight of manual transmission fluid is acceptable? I have asked my auto parts store and they have really good stuff t...