how do you get a fuel injection motor to start once it has ran out of gas

Asked by sheila1962 Apr 22, 2014 at 02:11 PM about the 1996 Chevrolet S-10 RWD

Question type: Maintenance & Repair

I cant get it to start

385

spray a little starter fluid in the air intake or in the throttle body and see if it starts if it starts and shuts off it could be your fuel pump or a simple fuse for the fuel pump or it can be your fuel filter or even your fuel pressure regulator ect but lets start by checking to see if any fuel is makeing its way up to the fuel rail

2 people found this helpful.

Mark helpful

Your Answer:

how do you get a fuel injection motor to start once it has ran out of gas 1 Answer

I cant get it to start

1996 Chevrolet S-10 RWD

-

Maintenance & Repair
hello i have a 91 s10 with the 4.3 v6 the truck ran great with a broken motor mount on the driver side but after replacing it the truck wont start motor is getting gas fire and air PLEASE HELP 2 Answers

4.3 v6 with 3k+ miles ran great did full tune up still ran great then i replaced the driver side motor mount and it wouldn't start i used a jack to lift the motor to replace the broken mount im gett...

1991 Chevrolet S-10

-

Maintenance & Repair
How do I get my vehicle out of diagnostic mode if I've already disconnected the ground cable once 1 Answer

I have a 1989 Chevrolet S10 2.5 EL standard cab manual 5 speed 4x2

1989 Chevrolet S-10 EL RWD

-

Maintenance & Repair
I have a 1994 chevy s10 v6 that wont start checked fuel pump and to see if it had spark all checked out ok if I pour gas into the intake truck starts can anyone help? 5 Answers

1994 Chevy S10 2wd Truck V6 has spark and fuel pump seems to be working it but wont start if I pour gas in the intake it starts but dies can anyone help?

1994 Chevrolet S-10

-

Maintenance & Repair
I have a 1995 S10LS V6TBI engine in it. I am having a problem with the air conditioner blower motor. When you turn it on. it may or may not work and blow air for you. You can feel the cold air at the vent. but no blower to get it into the cab. I have already replaced the blower switch and it didn't help. Now I am stuck between the relay, the resistor or the motor itself trying to go out. Any help would be greatly appreciated. 1 Answer

1995 Chevy S10LS V6 TBI Engine Problem with a/c blower motor not working all the time Replaced blower motor switch and it still cuts in and out when it wants to Would the relay or the resistor cause t...

1995 Chevrolet S-10 LS LB RWD

-

Maintenance & Repair

Used Ford Ranger

14 Great Deals out of 1,454 listings starting at $2,888

Used Toyota Tacoma

53 Great Deals out of 1,012 listings starting at $8,708

Used Ford F-150

304 Great Deals out of 15,351 listings starting at $1,954

Used Dodge Dakota

19 listings starting at $4,394

Used GMC Sierra 1500

131 Great Deals out of 6,882 listings starting at $3,975

Used Chevrolet Blazer

17 Great Deals out of 828 listings starting at $21,977

Used Chevrolet Camaro

24 Great Deals out of 344 listings starting at $10,500

Used Chevrolet C/K 1500

4 listings

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

how do you get a fuel injection motor to start once it has ran out of gas

1 Answer

Your Answer:

Shortcuts

Search Chevrolet S-10 Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

how do you get a fuel injection motor to start once it has ran out of gas

1 Answer

Your Answer:

Related Questions