1997chevy s 10 2.2 engine 2wd 5speed trans. There is a 3/16 hole in the bottom of my waterpump. Can i plug the hole or do i need to replace waterpump???

1997chevy s 10 2.2 engine 2wd 5speed trans. There is a 3/16 hole in the bottom of my waterpump. Can i plug the hole or do i need to replace waterpump??? 3 Answers

I need the side panels for the extended cab on my 1996 Chevy S-10. Where can I find them? 1 Answer

Rust has taken the best portion of the lower part of both sides of the panels on the extended cab portion of my 1996 Chevy S-10. A person who looked at it thought I should try to replace the panels i...

Searched for: I have a 98 s10 with a 2.2 motor that has a bad oil leak on the passenger side of the motor. Looks like its coming from a censor not far from the coil packs. can you tell me what that censor is or if its not coming from there then where would it be leaking from in that area? 4 Answers

The oil is pouring bout in that area but I can't tell for sure where it's leaking.

why is my 1998 S-10 2.2 auto bog down very bad when I try to punch the gas. I just install a very good battery and have one on those innova 3100 abs models and it read that ther are no stored data or 3 Answers

my S-10 will bog down when I try and punch the gas. My inniva scanner says no stored data or freeze frame data either. It was running fine and then when my wife was coming home from work it started up...

I have a 1998 s 10 extended cab pick up truck 2.2 automatic transmission 4L60E my question is would a trani of a v6 vortec md8 work. And fit for my truck 1 Answer

Im trying to put an automatic transmission of v6 s10 md8. Serial 8676339 to a 98 s10 pick up truck 2.2 and it has a 4L60E serial 24207965 will it fit and. Work for my 2.2 s10 truck ?