what makes it miss really bad when slowing down or sitting still, going down road it runs fine
already put new plugs and wires and distributor cap on it and it still doing it , no check engine light to have it tested.
firebird338 answered 8 years ago
The check engine light may not be on but it will store the bad code in it memory so even if the light is not on have it scanned for codes anyway.
already put new plugs and wires and distributor cap on it and it still doing it , no check engine light to have it tested.
2000 Chevrolet S-10 LS 4WD
-
Maintenance & Repair
Was rolling in 5th gear going 60, heard aloud screeching noise and it threw us forward in the seat and slowed it immediately to about 40.I pulled off to the side of the road and smoke was coming from...
1991 Chevrolet S-10 RWD
-
Maintenance & Repair
my 1989 chevy s10 has a 2.5l throttle body engine jumps really bad when you get to one spot on the throttle evry thing else is good runs good only that one spot in jumps around really bad linke its ...
1989 Chevrolet S-10 LB RWD
-
Maintenance & Repair
my S-10 will bog down when I try and punch the gas. My inniva scanner says no stored data or freeze frame data either. It was running fine and then when my wife was coming home from work it started up...
1998 Chevrolet S-10 LS RWD
-
Maintenance & Repair
Chevy idle normal then down then normal reapetly
1989 Chevrolet S-10 LB RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.