i have a 2003 s10 code shows misfire on number 4 cylinder it wont fire at all
code shows po304 cylinder misfire new plugs wire are good cylinder pressure is good fuel injectors show good but there is no fire at number four.
Asked by douglas1000 Aug 20, 2015 at 09:20 AM about the 2003 Chevrolet S-10 LS LB RWD
Question type: Maintenance & Repair
code shows po304 cylinder misfire new plugs wire are good cylinder pressure is good fuel injectors show good but there is no fire at number four.
code shows po304 cylinder misfire new plugs wire are good cylinder pressure is good fuel injectors show good but there is no fire at number four.
2003 Chevrolet S-10 LS LB RWD
-
Maintenance & Repair
4.3 v6 with 3k+ miles ran great did full tune up still ran great then i replaced the driver side motor mount and it wouldn't start i used a jack to lift the motor to replace the broken mount im gett...
1991 Chevrolet S-10
-
Maintenance & Repair
I have to start the truck back up..and cut the wheel a lil bit at a time so it won't die on me.....but when I cut deep truck cuts off.......I checked the steering fluid its good.....would anyone ...
1998 Chevrolet S-10 LS LB RWD
-
Maintenance & Repair
1994 Chevy S10 2wd Truck V6 has spark and fuel pump seems to be working it but wont start if I pour gas in the intake it starts but dies can anyone help?
1994 Chevrolet S-10
-
Maintenance & Repair
long cranking before starting, poor fuel mileage, 160k miles. tuned up at 146k. The engine always started on the first crank. No it cranks for 5-10 seconds before it slowly starts.
2001 Chevrolet S-10 LS Crew Cab 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.