Use a grease gun and inject grease in all of the components using the zerk fitting. Ball joints, inner and outer tie rods, idler arm, Pittman arm if applicable. Lubricate the upper and lower control arm bushings, sway bar, etc.. using a silicone based spray lubricant.
Have it lubed. It sounds like it needs to be greased.
my pickup makes alot of squeaking sound when turning, what should i do?
1998 Dodge RAM 1500 Laramie SLT Club Cab LB RWD
-
Maintenance & Repair
95 dakota,2wd, On the a frames there are 2 bolts that are allowing the whole thing to move when the brakes are applied,is there bushings supposed to be there? This is my first experience with a Dodge ...
1995 Dodge Dakota Sport Club Cab RWD
-
Maintenance & Repair
Got a cricket like noise from the frontend only when driving under hard ish acceleration then goes away when cruising, no noise when stationery revving up, timing belt done about 20000 ago Car has ...
Audi A3 Sportback
-
Maintenance & Repair
how do I get a tach to work in this model truck?
1994 Dodge RAM 1500 LT LB RWD
-
Maintenance & Repair
I have a 2002 1500.When I turn right there is a very loud grinding noise coming from the front.Not when I turn left.HELP!!
2002 Dodge RAM 1500
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.