Where is the ecu located on a 98 dodge ram?? Im about to install a lemiar for my cb and they tokd me it could mess up the ecu if to close. Any info will be greatly appreciated

Where is the ecu located on a 98 dodge ram?? Im about to install a lemiar for my cb and they tokd me it could mess up the ecu if to close. Any info will be greatly appreciated 2 Answers

What extras if any will i need to install a remote starter on my 2004 dodge ram 1500 QC 4x4 5.7L With a black key 1 Answer

I have a 2004 dodge Ram 1500 4x4 QC 5.7 L V8. It has the 7 speaker infinity sound system with the factory amp behind the glove box. 20 in stock chrome wheels, (I'm naming every single thing possible b...

I have a 2005 Ram 1500 ST. Putting a cb radio. Will have to floor mount with self tapping screws. Is the floor thick enough to use screws WITHOUT them going all the way through to the outside? 6 Answers

I have a 2005 Ram 1500 ST. Putting a cb radio. Will have to floor mount with self tapping screws. Is the floor thick enough to use screws WITHOUT them going all the way through to the outside?

I was putting a new radio into my 03 Ram 1500 and just to make sure the radio worked in it.I must have not protected a couple of the wires all the way and a couple of the wires touched on the back of the radio. after the fact, the courtesy light wont come on when opening the door, and Pretty much all the functions that a vehicle is supposed to perform without turning on the vehicle don't work. and neither does the radio when I hook it up. Yes, i checked all the fuses in my fuse box. I even wen to the point of replacing all of the, even the ones that i thought had nothing to do with the situation. the radio still works because i checked it by putting power to it by directly putting it to the battery. and the fuse didn't pop in the back of the radio when all this happened. so at this point I'm completely lost. Any help with this would be much appreciated. 1 Answer

Putting in a new radio, a hot touched something and now nothing works.

Is it possible to install a flame thrower exaust on a fuel injected motor ? 2 Answers

I have just purchased a flame thrower kit for my 2005 Dodge Ram 1500 and was wondering how hard it is to hook up on a fuel injected motor. I am also installing 4" exaust stacks behind the cab hoping i...