How long does the labor book say it should take to remove and replace a 2001 Chevy suburban 4X4

No not yet

day or two to r&r..must be a slow shop

All our mechanics routinely change inline automatic transmissions in 2-4 hours. Find a shop or mechanic that is hungrier for your business! Or that has integrity!

How much is the labor on a Chevrolet suburban 1500 suspension

How long does it take to change a motor on chevy 7-150

I am a mechanic, full time.. there is no way your going to remove and replace the trans and transfer case in an 18 year old full size Chevy 4x4. if it was 2 wheel drive I would say sure couple hours no problem. but lets be realistic, 18 years all the fasteners are rusted. its gona take an hour or more just to heat up and remove exhaust manifold bolts for the Y- pipe, 3 on each side then 2 where it connects to tail pipe. then ya gota replace any with damaged, rusted out threads while trans is out. its an 8 to 9 hour job pending on condition of fasteners.

It took me about 10 hours to remove and put back in the transfer case...plus to go get the gasket and gear oil...

I just got done with mine and transmission filter and fluids started at 5:30pm and finished at 9:45pm on 4/17/20

I've been doin mechanic work for 30 yrs and I can do a job like this In no longer than 2 hrs or less

Don't know what book says but its 4 to 8 the job depends on the tools, the person and if u got a lift 4 to 5 if u got to do it without much exp or the tools and lift 8hrs plus book prob say 6.5

In Mexico, a trany mechanic took out and repaired my trany in two days time. He quoted $500; however, I paid him $700 knowing I'd pay more in the USA and knowing he dropped his other work to get it done for my convenience. Now, I have a similar need for 06 GMC Envoy Denali with 5.3 V-8, but I'm in Az. and hope to find someone to do it for me. I do not know yet, but I'd expect 700-1000 to get it done off the books?

Guru..., what did it end up costing you?