Dodge 1500 5.2 is not getting spark
I put a 98 5.2 dodge in to a 2001 4x4 dodge and its
not getting spark
jetjurnigan answered 6 years ago
Take the crank sensor from your old engine n put it in the new one. It's either that, without more info, or the flywheel or flexplate is different.
I put a 98 5.2 dodge in to a 2001 4x4 dodge and its not getting spark
2001 Dodge RAM 1500 ST 4WD
-
Maintenance & Repair
I have a 99 dodge 1500 4x4 5.2. My trans kicked out of gear and wouldnt go back. I replaced the trans filter and now it goes into gear but makes a screeching sounds when stoped. It's shifting rough...
1999 Dodge RAM 1500 Laramie SLT Club Cab LB 4WD
-
Maintenance & Repair
Where's the cam sensor located at on my Dodge ram 1500 2000 model with a 5.2 engine
2000 Dodge RAM 1500 SLT RWD
-
Maintenance & Repair
ok my 99 dodge the tranny went out in it so it set up for a little bit but was started. i had to move it from the location it was in to my house. on moving day it started but didnt stay running bc ...
1999 Dodge RAM 1500 Laramie SLT Club Cab LB 4WD
-
Maintenance & Repair
On old truck I picked up I was going through it and found it does not have a PCV on it, found that interesting. I asked several people and everyone says it should have it. This is a mexico build in...
1998 Dodge RAM 1500 Laramie SLT 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.