I have a 2001 dodge ram 1500 4x4 when you apply power from the start the flexplate rubs the inspection cover neither seems to be bent any ideas
I have the transmission out of the truck could the torque converter be the problem
I have the transmission out of the truck could the torque converter be the problem
2001 Dodge RAM 1500 ST LB 4WD
-
Maintenance & Repair
I know the truck recently had a newer motor put in from a 1998 dodge ram. I have already changed the fluid and filter and checked the fluid level when it was warm checked the level twice it was goo...
1997 Dodge RAM 1500 Laramie SLT Club Cab LB 4WD
-
Maintenance & Repair
I turn the truck off and restart it and the gauge works fine. Any ideas?
2004 Dodge RAM 1500 SLT Quad Cab 4WD
-
Maintenance & Repair
Ok so yesterday I was going up my uncles hill and i stepped on the gas to get moving up the hill at a decent speed but my trucks rpms shot up high and sounded like the truck was having difficulties ...
1999 Dodge RAM 1500 Laramie SLT 4WD
-
Maintenance & Repair
2001 Dodge Ram 1500 Up until yesterday the oil gauge in my 2001 Dodge Ram 1500 would occasionally go to 0 - the check gauges lite would come on and pressure would be restored just as quickly as it h...
2001 Dodge RAM 1500 SLT Plus Quad Cab 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.