Dodge Ram 1500 4.7L oil pressure
Just had my 02 Dodge Ram 4.7L engine
rebuilt from top to bottom. Shop did the
heads I performed the rest new crank
bearings, rod bearings, pistons, new oil
pump, timing chain etc. After truck idling
for 30 seconds with regular oil pressure
complete loss of pressure from sensor and
check gauges light comes on. I took out
new oil sensor and checked with Manuel
gauge and reads standard oil pressure 10
at idle and as you accelerate the oil
pressure climbs as it should. Went out
bought another brand new sensors figuring
that could be it same issue happens after
30 seconds of run at idle. This motor was
cleaned from top to bottom of all that white
oil sludge in pick up tube, new pan, new
PVC, cleaned the oil intake of that gunk.
Any ideas on why oil pressure is not
functioning even with new gauge and
rebuilt motor?