is the 45rfe transmission main housing the same between 2 and 4 wd vehicles? It appears that the output module can be swapped onto the 45rfe main body.
5 Answers
Your question is misleading. You going from a 2wd 4.7 to a 4x4 with a 5.7, correct? Not just a 2wd to a 4x4. The bell housing and mounts would have to be the same as well. Are you swapping from the same full sized Ram or is one of the trucks a Dakota or Durango?
My apologies, the donor transmission was removed from a 2003 Dodge Ram 1500, 4.7L, 2wd, my truck is a 2003 Dodge Ram 1500, 5.7L, 4wd. It appears that the bell housing is same and my only concern now is the output shaft (cone) assy, I am going to remove the 2wd straight back output shaft assy and then try to mate my "transfer" case assy in its place.
1 people found this helpful.
Ahh ok I'm with you now. Yes that should work. Good luck.
Did this work the 4.7 transmission onto the 5.7 transmission
1 people found this helpful.