what causes a crank no start condition?
Asked by Guru9XML8D May 28, 2021 at 04:43 PM about the 2003 Toyota Camry XLE
Question type: Maintenance & Repair
Chasing P301 code, replace plugs.valve gasket, disconnect fuel rail clean
injectors. No CEL with ignition in on position
2 Answers
Check your fuel pressure next. Also a P0301 codes is a cylinder #1 misfire code. If you replace the spark plugs, swap the ignition coils from #1 to #2 and see if the code move, P0302. Then you know that coil is faulty.
1 people found this helpful.
No CEL with the ignition in the run position and the engine not running is most likely a PCM failure. The bulb might be burned out too so check that before you condemn the PCM. Hope that helps! Jim
1 people found this helpful.