It's fine as far as they are the same height and diameter other wise it may screw up the transfer case and throw all kind of abs/tcs lights.
wheels that bolt up sticking out further can casue more stress to components such as ball joints. The 4x4 set up on these blazers have a very positive offset like a front wheel drive. You can do it, your not gonna break parts left and right but it does casue increased wear.
I don't want to end up having to change my wheel bearings because my wheels stick out to far in the front
1999 Chevrolet Blazer LS 4-Door 4WD
-
Car Customization
I have a 04 blazer 4x4 and I just put aftermarket rims on it and they are all the same size but the front wheels stick out and the back ones fit normally. Any ideas on what the problem could be?
2004 Chevrolet Blazer LS 4-Door 4WD
-
Car Customization
I have 93 chevy blazer 2dr silverado (thats the full size blazer) which currently has a body lift. Id like to switch to a suspencion lift, and was wondering if this would fit on it? http://www.roughc...
1993 Chevrolet Blazer Silverado 2-Door 4WD
-
Car Customization
well its simple i just bought a 2000 blazer and the person i bought it from said it was a good truck and i drove it did not notice the sway till later but nevertheless it SWAYS he said he has put a 2"...
2000 Chevrolet Blazer LS 4-Door 4WD
-
Car Customization
I can't order parts until I know what I have can u help me i was told theres a code in the back of the motor but i was told it was on the pass side and someone else said driver side and then i wa...
1994 Chevrolet Blazer 2-Door 4WD
-
Car Customization
CarGurus has 913 nationwide Blazer listings starting at $2,888.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.
