2001 GMC serria 5.3. After changing transmission fluid truck will not go in to 2nd. I put everything back on correctly.
There was no metal peices n trans pan. No check engine lite on.
Either
yetilikesbeer answered 11 years ago
Might not be gettin fluid to the pump. Was the new filter the same as the one you pulled out, was the neck the same length. Check to make sure the filter was inserted al the way up. If you don't want to pull the pan, crack a cooling line on the tranny or at the rad to check for pressure, briefly start the truck. If oil was leaking from the fitting your pump is working and I have no idea what happened. If there is no fluid or fluid with no or low pressure check the filter.
There was no metal peices n trans pan. No check engine lite on. Either
2001 GMC Sierra 1500 SLE Extended Cab SB
-
Maintenance & Repair
I used type F transmission fluid in my GMC sierra 1500, will everything be okay?
GMC Sierra 1500
-
Maintenance & Repair
the truck would not start so we took the bed off and changed the fuel pump. It started and run fine, we even drove it down the rode. After we put the bed back on the truck the truck would not start. H...
1990 GMC Sierra 1500 C1500 Standard Cab SB
-
Maintenance & Repair
Hello I have a 2001 GMC sierra 5.3 engine her name is patches and she's really sick I really need your help:( she runs On some gears? (4hR yes ) (4H2 yes) (4H1 yes )( 4LR yes )(4L2 yes )(4L1 y...
2001 GMC Sierra 1500 SL 4WD Standard Cab SB
-
Maintenance & Repair
died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was...
2004 GMC Sierra 1500
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.