07 Nissan Sentra Manual Transmission
Asked by HollieBelle40 Nov 28, 2018 at 02:26 PM about the 2007 Nissan Sentra Base
Question type: Maintenance & Repair
This car is a 6-speed. I can put it into all the gears, but Reverse (which you shift
up and to the left of 1st), 1st and 2nd gear don't do anything when put into gear,
there is no strange or loud noise, but when you let off the clutch and try to
accelerate nothing happens. 3rd, 4th, 5th and 6th all work fine - I have to start
in 3rd - do I need to replace the clutch or is it the tranny
5 Answers
teenburgercombo answered 6 years ago
Is your shift stick able to easily find the gear or does it flop about?
HollieBelle40 answered 6 years ago
it easily finds all the gears, it just doesn't do anything in R, 1, 2 or 3rd
did you figure out the problem? I have a 2017 Nissan Sentra 6 speed doing basically the same thing.
teenburgercombo answered 5 years ago
It sounds like an issue with your shift assembly and not your transmission. If you remove your shift knob and the cover so that you can view the actual shift channels and cables, you might be able to better troubleshoot. In my case, my shift bearing blew and I wound up replacing the shift assembly. Everything went well until my shift wasn’t able to find certain gears — turns out I didn’t seat it quite right. A quick adjustment and I was able to shift fluidly.
