I replaced the starter on my 92 and now I have no clutch. .what could be wrong?
Asked by Charlottebarton Mar 08, 2015 at 07:34 PM about the 1992 Chevrolet S-10 RWD
Question type: Maintenance & Repair
I replaced the starter on my 92 and now I have no clutch. .what could be wrong?
Your Answer:
Related Questions
-
I replaced the starter on my 92 and now I have no clutch. .what could be wrong? 1 Answer
1992 Chevrolet S-10 RWD
-
Maintenance & Repair
-
92 s10 clutch problems what do I do? 2 Answers
I’ve replaced a clutch in my 92 S-10 I’ve replaced both the master and the slave cylinders and the throw out I’ve bench bled the system and bled it through the bleeder screw I have pressure, but m...
1992 Chevrolet S-10 RWD
-
Maintenance & Repair
-
the fluid in my slave cylinder leaks down after a while,the clutch worked great yesterday and now i have no pedal, any advice would be great 1 Answer
the truck was my dads and after he passed away it set for a couple of years ,it was always a good running truck ,it still ran good when i got it running the other day,the slave cylinder was dry but ...
1987 Chevrolet S-10 RWD
-
Maintenance & Repair
-
Was rolling in 5th gear going 60, heard aloud screeching noise and it threw us forward in the seat and slowed it immediately to about 40.I pulled off to the side of the road and smoke was coming from under the truck.I looked around and couldn't see anything visibly wrong.I started it up again just fine and started rolling in 1st gear, then I tried to shift to 2nd the truck just stopped and wouldn't go into any gear.At this point the truck will start but when I let the clutch out, it dies(in neutral). Had to remove my drive shaft to be towed on towrope because it wouldn't roll smooth in neutral. When the engine is running now I don't feel any vibration through the gearshift anymore like how I used to before it broke down. What could it be? 3 Answers
Was rolling in 5th gear going 60, heard aloud screeching noise and it threw us forward in the seat and slowed it immediately to about 40.I pulled off to the side of the road and smoke was coming from...
1991 Chevrolet S-10 RWD
-
Maintenance & Repair
-
I have a '95 s-10 4.3 z code on the motor. I've replaced the thermostat,water pump, hoses, and fan clutch. I have no leaks and no oil in the water or water in the oil. I'm not losing coolant. 3 Answers
50/50 mix. Overheats on the highway. Runs fine at idle and in town. I have flow through the radiator. Any ideas? I'm stumped!!!!
1995 Chevrolet S-10 LS Extended Cab 4WD
-
Maintenance & Repair
Shortcuts
Search Chevrolet S-10 Questions
CarGurus Experts
-
#1Andrew OlsenReputation9,860
-
#2Robert SmithReputation3,420
-
#3Gene ArnettReputation2,830
Find great deals from top-rated dealers
SearchRelated Models For Sale
Used Ford Ranger
24 Great Deals out of 1,577 listings starting at $2,888
Used Ford F-150
338 Great Deals out of 15,311 listings starting at $1,712
Used GMC Sierra 1500
147 Great Deals out of 7,209 listings starting at $3,950
Used Chevrolet Blazer
20 Great Deals out of 869 listings starting at $19,499
Used Dodge Dakota
21 listings starting at $3,999
Used Chevrolet Camaro
12 Great Deals out of 312 listings starting at $9,499
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.