I have a 2006 jeep wrangler x, the engine will turn over but won't start. I replaced the coil pack and crankshaft sesnor. Still won't start, no power going to the coil pack

I have a 2006 jeep wrangler x, the engine will turn over but won't start. I replaced the coil pack and crankshaft sesnor. Still won't start, no power going to the coil pack 3 Answers

My truck won't start. The battery seems ok but the engine makes a ticking noise when I try to start it. Do you think it's my starter? 1 Answer

I have cleaned the battery connections. All my lights seem fine but she won't start. It was starting very slow before.

2006 jeep wrangler gauges come on but the engine will not turn over 2 Answers

turned the jeep on it started then died. turned it on again the gauges came on but it would not turn over.

how do i turn off the alarm to a 4-door 2008 jeep wrangler (hard top)? 5 Answers

the alarm to my brand new 2008 jeep wrangler, started going off after i had pressed the "unlock" button on the remote. after the alarm went off, i pressed the "panic" button on the remote, and nothing...

My 2000 Wrangler with inline 6 cyl. has a misfire code on cylinders 3 &5. I had a garage replace the coil pack and spark plugs. Code is back ? Injectors ? 6 Answers

It seems to be running smooth with an occasional drop in rpm at a low rpm. Nothing alarming tho. Could it be the injectors ???