1990 Chevrolet K2500 350 5.7 TBI / Runs rough after installation of new fuel injectors and throttle body rebuild kit
I have done a rebuild kit on my throttle body. Tore down to nothing. cleaned
everything up with throttle body cleaner. Replaced the fuel pressure
diaphragm, new fuel injectors, along with gaskets. Put back together and
installed on manifold. Hooked everything back up. Before a full start up, half
cranked over to build fuel pressure back up. Go to do a full start up and truck
starts, then which dies seconds later. While it runs in those seconds it
fluctuates rpms and runs rough. Truck stays running while foot on the throttle,
but note still runs rough. Fuel does come out the injectors while running.
doesn't smell flooded. All replaced gaskets do not leak nor does the
diaphragm. Could it be possible i have to re-time the time that now its getting
the correct fuel pressure? What do i look into here i am lost?
Note-
New fuel pump, lines tps and iac