firebird338 answered 6 years ago
Maybe the motor mounts. Do this test open hood get into vehicle put into drive hold foot on brake then tap the gas pedal with other foot if motor moves more then normal motor mount is bad do the same in reverse.
Or transmission mount, transmission itself or pilot bearing if standard. Too much gear lash in the rear end could do it also.
Open to any suggestions for it if you can help out don't have the money to take it to a mechanic would rather do it myself if I can
1995 Chevrolet C/K 1500 Silverado Extended Cab 4WD
-
Maintenance & Repair
i have a 1991 Chevy, just recently put a 383 stroker in it. i have holley throttle on it. the chip has not be put in it as of yet. my problem is after driving it on a 2 hour trip, one hour in to the...
1991 Chevrolet C/K 1500
-
Maintenance & Repair
Have replaced everything having to do with a solonoid clicking, starter, solenoid, battery, cables. Why does the solenoid still click before engaging?
1994 Chevrolet C/K 1500
-
Maintenance & Repair
V6 engine 2 wheel drive (?) OLD truck Already had replaced radiator, upper oil seals (?) need to do the lower ones sometime the brake line broke this morning so that's coming up really soon. Need ...
1996 Chevrolet C/K 1500
-
Maintenance & Repair
I have replaced both front calibers cause they were ceased and also have backed the brakes shoes up a little to see if the shoes was the problem and also checked the trans fluids also when I let o...
1994 Chevrolet C/K 1500 WT LB 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.