Generally that's a transmission issue. But that assumes the shift linkage is working properly to actually shift the transmission from park to drive.
The shift linkage the moves from park to drive works fine, it was loose and we tightened it. So no problem there, started the truck and put it drive but still didn't move.
Truck goes in gear but does not move when we push on the gas pedal
1993 Chevrolet C/K 1500 Cheyenne RWD
-
Maintenance & Repair
Just put in a new automatic transmission. Truck will start, it will go into gear but when I press on the gas pedal it will not move, but the rpm's go up. Theres new fluid in the transfer case and i...
1998 Chevrolet C/K 1500 Silverado Extended Cab 4WD
-
Maintenance & Repair
I have replaced both front calibers cause they were ceased and also have backed the brakes shoes up a little to see if the shoes was the problem and also checked the trans fluids also when I let o...
1994 Chevrolet C/K 1500 WT LB 4WD
-
Maintenance & Repair
1992 Chevy k1500 truck with auto trans 700r4. Had to remove rear driveshaft to get it to roll.
1992 Chevrolet C/K 1500 454SS RWD
-
Maintenance & Repair
My question is why does the 6 speed automatic transmission in my 2012 Chevy 1/2 ton 4x4 act like it shifts into neutral while driving along normally. The highest year it would let me select is a 99,...
1999 Chevrolet C/K 1500 LS Extended Cab 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.