Brake lights and turn signals don't work
I've checked all fuses and bulbs, replaced brake
light switch and turn signal switch. What to try
next?
beatupchevy answered 5 years ago
you need a multi tester to see what has power/ground and what don't , you could have checked those switches with it to see if they were good .
I've checked all fuses and bulbs, replaced brake light switch and turn signal switch. What to try next?
2007 Chrysler Town & Country FWD
-
Maintenance & Repair
02 town & country turn signals & Flashes and dash Lights and DASH Board is no Lights and Gauges do Not work. Thank you CB. . I blow the fuse (or Flasher switch) i had a Brake Light out when i replac...
2002 Chrysler Town & Country eX LWB FWD
-
Maintenance & Repair
I was driving and all of the sudden my heater stopped blowing and my turn signals wouldn't work? This happened at the same time, as if someone killed the power. When I say heater That includes defr...
2000 Chrysler Town & Country
-
Maintenance & Repair
Vehicle was in a minor accident now the steering wheel controls don't work and the windshield wipers won't turn off. Also the signal lights and cruise control don't work. I checked the fuses and the...
2010 Chrysler Town & Country Touring Plus FWD
-
Maintenance & Repair
Driving down the road and without an issue to speak of. Anything controlled by a switch on the steering column stops working, until I move the tilt up or down. What can I do to remedy this? Would a...
2005 Chrysler Town & Country Limited LWB FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.