Why my 2008 chrysler town and country fan doesn't work,after a change the thermostat,temperature sensor,any ideas?
I change temperature sensor,thermostat,but my car still heating up,and the fan do not
statrt?
Could be blown fuse, bad relay, bad wires going to the fan or just a burnt out fan motor. First check the fuse, then if you want, you can check the relay, or just buy a new one or switch with a identical one that is already in your car. If all checks out then remove the fan and wire it straight to the battery for only a moment. If it works then you should take a look at the wires.
I change temperature sensor,thermostat,but my car still heating up,and the fan do not statrt?
2008 Chrysler Town & Country LX FWD
-
Maintenance & Repair
Here we go...When it's cool and damp outside, the heater fan on my Town & Country either will not work, or, it will kick on after a few minutes. All summer....it worked fine for the a/c...but it gets...
1998 Chrysler Town & Country
-
Maintenance & Repair
The heater and AC fan stopped working when it is turned on. what could be the problem?.
Chrysler Town & Country
-
Maintenance & Repair
I also have a problem with the auto lights not turning on when i open any doors, but when i tap on the light cover (basically turning on the switch the light turns on). But i have more problems than t...
2001 Chrysler Town & Country LX LWB FWD
-
Maintenance & Repair
I have a used Chrysler town and country 2008. One of the sliding doors doesn't open nor close but I can hear that the motor is working. I found out that the reason is that there is a cable/wire that...
2008 Chrysler Town & Country
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.