Navigation/Radio Screen
Asked by ahnh418 Nov 30, 2016 at 09:55 PM about the 2008 Chrysler Town & Country Touring FWD
Question type: Maintenance & Repair
The screen for the radio/navigation/back up
camera went black but the radio still works. Also,
the volume and station changing buttons on the
steering wheel are now not working. Any
suggestions?
9 Answers
SBUSHIK1116 answered 8 years ago
mine does the same thing. Its an electrical issue. Best way to fix is buy a new one. If it goes off for a few mins then back on like mine it may be tolerable for you. I know when I priced mine out it was well over $600 for install and everything. I have a touch screen just like yours
On my 2014 Chrysler Town and Country my radio or my backup camera does not work it quit I check the fuses and it still don't work
There got to be a way to fix it
On my 2014 Town and Country my radio and backup camera quit later cut the lights on it will come on and off but nothing works
I have a 2004 Cadillac SRX that has the navigation system screen that is also used for the stereo, one day it just went black, now none of the volume buttons or anything work on the screen, help?
Gunnygijoe answered 4 years ago
I had the same problem in my mom's van. The radio volume worked, and the back up camera worked also. But the navigation and radio display did not work.
Gunnygijoe answered 4 years ago
Go into the van at night. Start the vehicle. Make sure all the inside lights are out it'll make it easier to see the radio screen. The display will be very light, it's not visible in the daytime. Go to the settings, then go to display settings in the display brightness will be all the way down to the bottom, just scroll it to the top and you'll be able to view your display and your navigation again. I hope this works for you it worked for me.
Thank you so much! It worked just like you said!! What a relief!
Guru9NJRMJ answered 2 years ago
Worked also for me Dealer never told me. Told would have to replace radio. I was messing with the brightness when when black.